Function	Masimo RD SET DCI
Saturation Normal (no motion)	70-100%Arms ± 2%
Saturation Motion	70-100%Arms ± 3%
Low Perfusion	SpO2 +/-2%
Pulse Heart rate	± 3% BPM
Pulse Heart rate w/motion	± 3% BPM

Temperature Specifications

Function	Covidien Electronic Thermometer
Temperature Accuracy	Quick Mode (Oral): ± 0.3°C
Temperature Accuracy	Std. Mode (Aux/Rectal): ± 0.1°C
Temperature Accuracy	Direct Mode ± 0.1°C
Response Time	4 sec (quick mode); 10-15 sec. (Axillary/Rectal); 60 sec.(direct mode)
Resolution	0.1°C

Blood Pressure Specifications

Specifications	Values
Range:	Pressure: Diastolic: 20-200 mmHg (adult), 20-160 mmHg (pediatric). Systolic: 40-260 mmHg (adult), 40-230 mmHg (pediatric) Heart Rate: 30-220 BPM (beats per minute)
Accuracy (BP):	Meets or exceeds ANSI/AAMI/ISO 81060-2:2013 standard for non-invasive accuracy (±5mmHg mean error with 8mmHg standard deviation).

General Specifications

Specifications	Values
Conditions for Use:	Operating: 10°C (50°F) to 40°C (104°F) 15 – 90% RH non-condensing - 700 kPa - 1060 kPa. Operating the monitor in an environment at maximum temperature can produce temperatures exceeding 41°C (41.6°C highest recorded) on a patient-applied part. It is up to the operator to determine if this temperature is too high based upon the condition of the patient and, if so, to ensure the ambient temperature of the environment is 38°C or below.
Storage:	-20°C (-4°F) to 55°C (149°F) 15 – 90% RH non-condensing - 500 kPa - 1060 kPa. Performance can be affected if used or stored outside the specified temperature, humidity, or altitude listed in the ranges above.
Power:	Internal power supply. Input: 100-240 VAC @ 1.5A max, 50-60 Hz. Output +9VDC @ 5A IEC 320 type input connector.
Battery:	Type: 7.2v, 6600mAh Internal Lithium-Ion battery Run Time (full charge): ~20 hrs* / 200 BP cycles Charge Time: ~6 hrs @ 23deg Celsius +/- 2deg *Unit with BP, Temp, SpO2, Wi-Fi, barcode scanner
Calibration:	The accuracy of cuff -pressure transducers/indicators should be verified bi-annually.
Safety Systems:	Independent hardware over-pressure circuit and redundant software overpressure algorithm to limit cuff pressure to less than 300 mmHg (+20/-10mmHg). Independent hardware timing circuit and redundant software timer algorithm to limit the duration of a blood pressure cycle to less than 180 seconds.
Dimensions:	Size (without thermometer option): 8” H x 6.75’’ W x 5.2’’ D or 215mm H x 190mm W x 140mm D
Standards:	ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012, EN 60601-1:2006/A1:2013, IEC 60601-1-2: 2007 EMC, IEC 80601-2-30: 2013, ISO 80601-2-61: 2011, ISO 15223-1:2012, ISO 10993-1, 2009, ISO 10993-5, 2009, EN ISO 10993-10, 2010, ISO 81060-2:2013, EN 50419: 2006, EN ISO 14971:2009, CSA C22.2 No. 60601-1, EN ISO 81060-1: 2012, IEC 60601-1-6: 2013
Classifications:	Equipment Classification: Class IIa per MDD, Class I (Electrical Shock), Continuous mode of operation, CE
Ingress of liquid:	Ingress Protection: IPX1: This device is protected against harmful effects of dripping water per IEC 60529.

Limited Warranty

SunTech Medical, Inc. provides to the original purchaser the following limited warranty from date of invoice:

Specifications	Values
Main unit, SpO2 modules, temp modules:	3 years
OPD Blood Pressure Cuffs:	2 years
Accessories (SpO2 sensors, temp probes, BP hose, etc):	90 days

Masimo® and SET® are registered trademarks of Masimo Corporation. Covidien® and FILAC® are registered trademarks of the Covidien AG Corporation. Nellcor® is a registered trademark of Covidien LP Limited Partnership.

SunTech® CT40 System & Modules

Description	Part Numbers
SunTech CT40 Base unit with BP (no power cord)	99-0134-00
SunTech CT40 Base unit with BP with AC Power Cord (Americas)	99-0134-01
SunTech CT40 Base unit with BP with AC Power Cord (Europe)	99-0134-02
SunTech CT40 Base unit with BP with AC Power Cord (UK)	99-0134-03
Masimo SET® SpO2 Module (preferred)	98-0411-01
Covidien FILAC® 3000 Thermometry Module	98-0411-02

Systems Reference Configuration

Description	Part Numbers
BP Only	99-0134-0X
BP, Masimo® SpO2	99-0134-0X + 98-0411-01
BP, FILAC® Temp	99-0134-0X + 98-0411-02
BP, FILAC® Temp, Masimo® SpO2	99-0134-0X + 98-0411-02 + 98-0411-01

Masimo SET® SpO2 Module Accessories

Description	Part Number
Masimo® RD SET DCI Adult SpO2 Reusable Sensor	4050*
Masimo® RD SET MD14 8’/2.4m Patient Cable	4108*

*Contact Masimo® for replacement orders

ChipOx Nellcor Compatible SpO2 Module

Description	Part Number
Reusable Adult SpO2 Finger Sensor, ChipOx	52-0010-00

Covidien FILAC 3000 Temperature Module Accessories

Description	Part Number
F3000 Oral/Axillary Temp Probe, 9’	52-0009-00
F3000 Oral/Axillary Isolation Chamber, Blue	45-0006-00
F3000 Rectal Temp Probe, 9’	52-0009-01
F3000 Rectal Isolation Chamber, Red	45-0006-01
F3000 Disposable Temp Probe Covers (Qty 5000)	98-0130-00
F3000 Calibration Plug	52-0011-00

Description	Part Number
Deluxe Mobile Stand	46-0040-00
SunTech CT40 Barcode Scanner (w/USB) with Scanner Mount	98-0257-00
SunTech CT40/50 WiFi Dual Band USB Dongle	45-0005-00
10’/3.0m Patient BP Hose, Bayonet to Bayonet	91-0028-16
AC Power Cord (Americas)	91-0003-00
AC Power Cord (Europe)	91-0003-05
AC Power Cord (UK)	91-0003-06
Mini-USB to USB Cable	91-0100-02
SunTech CT40 Rechargeable Lithium Ion Battery	98-0900-00
SunTech CT40 1D Barcode Scanner	98-0257-03
SunTech CT40 2D Barcode Scanner	98-0257-04

Blood Pressure Cuffs (Box of 5)

Description	Part Number
OPD Child (12-19cm) BP Cuff, Bayonet	98-0600-41
OPD Small Adult (17-25cm) BP Cuff, Bayonet	98-0600-43
OPD Adult (23-33cm) BP Cuff, Bayonet	98-0600-45
OPD Adult Plus (28-40cm) BP Cuff, Bayonet	98-0600-4A
OPD Large Adult (31-40cm) BP Cuff, Bayonet	98-0600-47
OPD Large Adult Plus (40-55cm) BP Cuff, Bayonet	98-0600-4C