Power On LED Light:
If lit in bright blue the monitor is on. Will remain lit if the
monitor is in ‘Sleep Mode’: see User Manual for more details.
Press the STAT button to take repeated blood pressure measurements for time sensitive or emergency situations.
The monitor will take repeated measurements for
10 minutes. To exit this functionality simply press the
STAT mode Button again.
For more details on this feature please reference the User Manual.
Stat Mode Button:
Scroll through menus & lists
Up Arrow:
Acts as the ‘enter’ button when making selections and menu options under the Main Menu screen.
Select Key:
Scroll through menus and lists
Down Arrow:
Used to select between the 2 modes; auscultatory (DKA™ mode) or oscillometric (OSC mode). Tango M2’s default DKA™ MODE uses an auscultatory technique for measuring blood pressure where ECG is required to achieve a BP Measurement.
An alternate oscillometric OSC MODE is available to take blood pressure readings without requiring an ECG signal.
Please see the User Manual for further details.
DKA™/OSC Toggle Button:
Start or stop a measurement. Additionally, you can press
the Start/Stop button to stop a blood pressure measurement currently in process; the message “ABORT” will appear
briefly on the display.
Start/Stop Button:
Register your Tango M2 Monitor online (by clicking here) or through mail to receive MAP as a function on your Tango M2 monitor. Please note that due to FDA Regulations MAP is not available to the United States market.
How can I get MAP on my Tango M2?
Power On/Off button.
Power Button:
Used as a communication port from the Tango M2 to the stress system. Used as an alternative to the RS-232 connection port. PN 98-1010-00 is needed for compatibility.
USB-B Port:
Used to perform field upgrades of UI code (see webpage “Software Update” tab for latest UI code) and downloading the Blood Pressure data from the Measurement Table
(see Appendix D in User Manual for instructions).
USB-A Port:
Used as the communication port from the Tango M2 to the stress system.
* Please view the Interface Notes in the Download Library section for the
Tango M2 to see the correct set-up between these two systems.
RS-232 Cable Port:*
Used as the external ECG trigger communication port from the Tango M2 to the stress system.
* Please view the Interface Notes in the Download Library section for the
Tango M2 to see the correct set-up between these two systems.
Or reference the eLibrary inside the Tango M2 monitor for this information.
BNC Cable Port:*
DC Power Connection, only use SunTech provided & approved power supply with the Tango M2.
Power Connection Port:
Measures the oxygen saturation of arterial blood during Cardiac Stress Testing. Uses the Nonin Pulse Oximeter; LPXpod (SpO2) sensors supplied by SunTech Medical.
See User Manual for more details.
SpO2 Port:
If using Tango M2 in DKATM MODE without being connected to a stress system Internal ECG is needed; this is a non-diagnostic ECG signal.
Internal ECG Connection Port:
For more details on this feature please reference the User Manual.
K-sound microphone connection to the Patient Cable. Proper microphone placement is important for reading accuracy.
Please reference the Orbit-K cuff videos online
for proper microphone placement.
Patient Cable Port (Microphone):
‘Air Hose’ connection to the Patient Cable.
Patient Cable Port (Pneumatic):
Used to hear the K-sounds that are identified by the Tango M2, this is non-diagnostic tool.
Headphone Port: (not shown):